High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

About Iron Oxide, Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is one the main forms of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of the main iron oxides found naturally in the mineral magnetite. As a suspension, iron dioxide can be used for biomedicine, agriculture, and environmental applications. It has super magnetic properties, and is easy to separate. Pulsed iron oxide's advantage is its ability to be modified using a wide range of organic compounds and inorganic substances (such as starch or polyelectrolyte) so it can be used in more applications. Magnet iron oxide can also be applied externally magnetically in biomedical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the application of iron dioxide on the macro-scale is important and has a high reactivity, it can also be spontaneously combustible when smaller quantities are available, at both the micron or nano scales. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulver in bulk, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be reddish-brown powder or iron oxide red. Odorless. Water, organic acids, and organic solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: a (positive magnetic) or g (diamagnetic). The dry-produced product's fineness is usually less than 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.12 5.24 A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 (Powder:

TEST ITEM	H130	H190
Content Fe2O3>=%	96	96
105degC volatile matter <=%	0.9	0.9
Hydrotrope <=%	0.25	0.25
Water-soluble sulfate and chloride=%	0.18	0.18
Residue on Sieve (10um)mesh	0.45	0.45
Water suspension pH value	5.0-7.0	5.0-7.0
Oil absorption (ml/100g).	20	20
Color (as measured against the sample)	Micro-	Micro-
Tinting strength in percent	99	99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O are available. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing, and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous sulfurate solution with excess sodium hydroxy solution. (The alkali excess must be 0.040.08g/mL). Then you can pass the mixture in to the air at room temp to transform it into reddish-brown ferrichydroxy colloidal solution. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 7585 the ferrous Sulfate reacts and forms iron oxide.
2. Dry method
Iron reacts with Nitric acid to create ferrous nitrate. This is then cooled and crystallized. Then it is dried and washed again with water. Finally, the iron oxide red product can be obtained by pulverizing. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as the primary feedstock in the steel and iron industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder known as "jeweler’s red", "red rouge" or just "roie" is an extremely fine form of the mineral. It's used to polish metallic jewellery and lenses. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for the exceptional finish that it can provide. Rouge slightly marries gold when polishing it. This contributes to its appearance. The rouge can be sold in powder or paste form. It is also laced onto polishing cloths and solid bars with a grease binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", and 101. They include Pigment Red 101, Pigment Brown 6 and Pigment Yellow 6. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetics by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage media. This included magnetic disks (for data retention) and magnetic tape (used to record audio and video as well as data storage). The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or using alternate crystal phases like b-Fe2O3.
6. Me dicine
Calamine lotion is an ingredient that can be used to reduce mild itching. This is what gives the lotion its pink color.

Iron oxide powder Fe2O3 storage conditions:

Iron Oxide Fe2O3 Powder should be kept in a dry, cool environment. It should not be exposed to the elements.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in two plastic bags with the inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g, 1 kg/bag, 25kg/barrel and as per your request
Iron Oxide Fe2O3 powder shipping can ship out by sea or air as soon as you receive payment receipt.


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical materials. They have over 12-years experience providing nanomaterials such as graphite powders, boride powders, nitride & graphite powders.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)